Kontakt +49 (0)30 403 646 688   Beratung und Verkauf (MO - FR, 8 - 17.30)
Seite wählen

LED workshop lighting

Highly efficient lighting solutions for your workshop or automotive garage – from August Müller Lichttechnik

For balanced and good lighting in your workshop, choosing the right lighting technology is of high importance.

In order to see smaller parts properly, it is imperative to have uniform, glare-free and flicker-free lighting throughout the workshop. For this we have had our lights certified, the lights of the AML-GE, AML-HB and AML-SQ series are absolutely flicker-free.

.

The release of melatonin (sleep hormone) is slowed down by good and bright light, preventing fatigue and increasing the ability to concentrate.

Incident risks can thus be minimized, performance potential better exploited and workflows optimized.

A professional lighting of your workshop is the basis for a high working comfort and an increase in your productivity.

.


The LED high bay luminaires of the AML-GE, AML-HB and AML-SQ series from August Müller Lichttechnik are designed to meet the special requirements for illuminating workshops and impress with their particularly high energy efficiency and very long service life. Due to a beam angle of 120° (The AML-SQ series has a beam angle of 90°) the glare effect is reduced and the colour temperature of 4,000K provides a neutral light. Thanks to high-quality LED drivers from Mean Well, the light is absolutely flicker-free.

.

Take advantage of LED workshop lighting and modern LED technology for your workshop when retrofitting or installing new:

.

  • up to 90% power saving
  • No switch-on delay, full brightness immediately
  • .

  • Low maintenance costs due to very long lifetime
  • .

  • no flickering, no UV and IR radiation
  • low heat generation
  • full dimmability
  • harmless to health and environment
  • numerous certifications

Emphasis in the workshop

The finer the work in your workshop, the higher the illuminance needs to be. The DIN 12464-1 provides the following values for this as a guide:

  • Preassembly of components: 200 lux
  • .

  • Fitters’ shop: 300 lux
  • Machinery workshop: 500 lux
  • .

  • Automotive workshop: 500 lux
  • Radio or television workshop: 500 lux
  • .

  • Museum or craft workshop: 500 lux to 1500 lux
  • .


Online Light Planner

Now easily plan your lighting online – with our free online lighting planner.

Professional Lighting Calculation

We are happy to provide you with a free of charge and no obligation professional lighting design according to your requirements.

Sample light

Request a sample light free of charge and without obligation.


Conversion of existing hall lighting

Products from our company replace the following lights
AML-HB-250 D
AML-GE-240 D
1pc HQL lamp 500W
7-8pcs fluorescent tubes 58W
1 pc halogen bulb 2,000 W
23-24 pcs incandescent bulbs 100 W
AML-GE-200 D
AML-SQ-200 D
1pc HQL lamp 400W
5-6pcs fluorescent tubes 58W
1 pc halogen bulb 1,500 W
19-20 pcs incandescent lamps 100 W
AML-GE-160 D
AML-SQ-150 D
1pc HQL lamp 300W
4-5pcs fluorescent tubes 58W
1pc halogen bulb 1,000W
15-16 incandescent bulbs 100W
AML-SQ-100 D
AML-GE-80 D
1pc HQL lamp 250W
3-4pcs fluorescent tubes 58W
1pc halogen bulb 750W
11-12 incandescent bulbs 100W
Reference values

New construction / redesign of your workshop lighting

We recommend for a car workshop with the dimensions 16,00 m x 12,00 m x 6,00 m (lxwxh), with 2 rolling doors and lifting platforms a lighting with our AML GE-240 D. With only 12 lights you have already achieved a uniform illuminance of approx. 800 lux. For each lifting platform, 2 rows of 3 luminaires each and about 0.50 m apart are mounted to the left and right of the lifting platform, spacing them about 4.00 m apart along the length of the lifting platform.

As an alternative for the discerning eye, we recommend our AML-HB range of design LED high bay spotlights. For this area, ideally 12 pieces AML-HB-250 D are needed.

Concept LED Workshop Lighting

Savings with LED hall lighting compared to conventional lighting technology

Electricity Savings

With 12 pieces of AML-GE-240 D, you can replace 12 mercury vapor lamps (HQL) with 400 W each, resulting in a total electricity saving of 1,920 W/h. With a useful life of at least 15 years and an average duty cycle of 8 h/day, this results in electricity savings of 84,096 kW/h. At an average electricity price of currently 27.5 cents/kWh, this corresponds to a total electricity cost saving of 23,126.40 EUR.

.

If 12 halogen incandescent lamps with 1,500 W each are replaced, this even results in electricity cost savings totaling 182,120.40 EUR under the same conditions.

CO2 savings

.

At the same time, one benefits from significantly lower CO2 emissions, replacing 12 mercury vapor lamps (HQL) with 400W each by 12 pieces of AML-GE-240 D, this corresponds to a reduction of approximately 40.79 tons of CO2 at an average duty cycle of 8h/day and a useful life of 15 years, as well as a CO2 emission of 485 grams per kW/h.

If 12 halogen incandescent lamps with 1,500W each are replaced under the same conditions, this even results in a reduction of 321.19 tons of CO2.

.

Very long life

.

The exceptionally long lifetime of our luminaires saves costs due to manufacture, transport, installation and disposal, which, in addition to saving electricity and CO2, improves the ecological footprint of your company and quickly amortizes the acquisition costs.


Order LED workshop lighting now for cheap direct sales: